Welcome: AiYue powder Coatings
Language: Chinese ∷  English

Automotive Coatings

  • Antistatic powder coating
Antistatic powder coating

Antistatic powder coating

Antistatic powder coating

Brief introduction: Adopt effective antistatic material, have long-term effective antistatic result and be suitable for indoor and outdoor environment

Characteristics:       ---Low volume resistivity of coating film 104-107 Ω· cm, effectively avoid accumulation of static electricity on equipment surface and protect instruments.

---Have long-term effective Antistatic result.

Usage: ---Be suitable for coating and protection for the surface of electrical apparatus and instrument and decrease the accumulation of static electricity.

Application parameter:

Curing time:     200℃×10—15 minutes

Spraying mode:     high-voltage electrostatic spray   60-80 KV

Suggested film thickness:             60—80 um

Physical Property:




Testing method

Pencil hardness

Pencil hardness instrument

≥ H


Impact resistance

Impact tester

≥ 50 kg.cm

GB/T 1732

Flexing endurance

Bending instrument

≤ 2mm

GB/T 6742

Adhesive force

Cross-Cut tester

0 grade

GB/T 9286


Bulge instrument

≥ 6 mm


Chemical property:

Fog-corrosion retardancy

≥ 500 Hs

≥ 9 grade

GB/T 1771

Resistance to heat and humidity

≥ 1000 Hs

Slight loss of gloss

GB/T 1740

Weatherability (outdoors product)

Artificial accelerated aging QUV-B313 240h

≥ 3 grade

GB/T 1865

Above tests adopt 0.8mm deoiling and derusting cold-rolled steel sheets, coating film thickness 4080um; performance index of coating film will change with brilliance changing.

Requirement of environment protection: the product is not included arsenium, selenium, lead, hexavalent chromium, mercury, stibonium, cadmium and other heavy non-ferrous metals and is in fully conformity with requirement of RoHS environment protection.

Storage condition: at about 25 and at ventilated indoors, avoiding direct sunlight. Under such condition, powder can be stored for twelve months and should be re-tested if more than 6-12 months and can be still used if the result is in conformity with requirements.

Note: each test index mentioned in the report is data tested from lab and should only be used for reference and cannot be used as performance commitment of product application. The result will change with environment factors and other conditions changing.

Click MSDS of corresponding products for more information of our products